W1DMR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W1DMR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	EffT*
1777094060	14.7 Volt	1310 Pkt	76 Pcnt	71 Pcnt
1777093762	14.7 Volt	1300 Pkt	77 Pcnt	71 Pcnt
1777093760	14.7 Volt	1300 Pkt	77 Pcnt	71 Pcnt
1777093460	14.7 Volt	1290 Pkt	76 Pcnt	71 Pcnt
1777093161	14.7 Volt	1300 Pkt	76 Pcnt	71 Pcnt
1777093160	14.7 Volt	1300 Pkt	76 Pcnt	71 Pcnt
1777092860	14.7 Volt	1270 Pkt	76 Pcnt	71 Pcnt
1777092562	14.7 Volt	1270 Pkt	76 Pcnt	71 Pcnt
1777092560	14.7 Volt	1270 Pkt	76 Pcnt	71 Pcnt
1777092260	14.7 Volt	1270 Pkt	75 Pcnt	71 Pcnt
1777091961	14.7 Volt	1280 Pkt	75 Pcnt	71 Pcnt
1777091960	14.7 Volt	1280 Pkt	75 Pcnt	71 Pcnt
1777091660	14.7 Volt	1300 Pkt	75 Pcnt	71 Pcnt
1777091361	14.7 Volt	1300 Pkt	75 Pcnt	71 Pcnt
1777091360	14.7 Volt	1300 Pkt	75 Pcnt	71 Pcnt
1777091060	14.7 Volt	1290 Pkt	74 Pcnt	71 Pcnt
1777090761	14.7 Volt	1290 Pkt	73 Pcnt	71 Pcnt
1777090760	14.7 Volt	1290 Pkt	73 Pcnt	71 Pcnt
1777090460	14.7 Volt	1290 Pkt	73 Pcnt	71 Pcnt
1777090161	14.7 Volt	1300 Pkt	73 Pcnt	71 Pcnt
1777090160	14.7 Volt	1300 Pkt	73 Pcnt	71 Pcnt
1777089860	14.7 Volt	1300 Pkt	73 Pcnt	71 Pcnt
1777089561	14.7 Volt	1290 Pkt	73 Pcnt	71 Pcnt
1777089560	14.7 Volt	1290 Pkt	73 Pcnt	71 Pcnt
1777089260	14.7 Volt	1280 Pkt	73 Pcnt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)