IU0TXS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU0TXS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxDigi*	TxDigi*	TTGO*	Aux*
1753408043	10 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753407442	16 Pkt/10m	0 Pkt/10m	4.04 Volt	0.3 Volt
1753406841	13 Pkt/10m	0 Pkt/10m	3.96 Volt	0.3 Volt
1753406240	7 Pkt/10m	0 Pkt/10m	4 Volt	0.2 Volt
1753405929	0 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753405639	13 Pkt/10m	0 Pkt/10m	4 Volt	0.3 Volt
1753405058	12 Pkt/10m	0 Pkt/10m	4 Volt	0.3 Volt
1753404437	11 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753403836	13 Pkt/10m	0 Pkt/10m	4 Volt	0.2 Volt
1753402634	9 Pkt/10m	0 Pkt/10m	3.98 Volt	0.3 Volt
1753402033	10 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753401431	8 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753400831	8 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753399629	9 Pkt/10m	0 Pkt/10m	4.04 Volt	0.3 Volt
1753399028	9 Pkt/10m	0 Pkt/10m	4.04 Volt	0.3 Volt
1753398427	12 Pkt/10m	0 Pkt/10m	4.06 Volt	0.3 Volt
1753397825	9 Pkt/10m	0 Pkt/10m	4.08 Volt	0.3 Volt
1753397224	10 Pkt/10m	0 Pkt/10m	4 Volt	0.3 Volt
1753396623	12 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753396022	12 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753395421	9 Pkt/10m	0 Pkt/10m	4.02 Volt	0.3 Volt
1753394820	13 Pkt/10m	0 Pkt/10m	4 Volt	0.3 Volt
1753394219	9 Pkt/10m	0 Pkt/10m	4.04 Volt	0.3 Volt
1753393618	7 Pkt/10m	0 Pkt/10m	4.04 Volt	0.3 Volt
1753393017	13 Pkt/10m	0 Pkt/10m	3.96 Volt	0.3 Volt

*Used Equation Coefficients:

RxDigi: 0, 1, 0

TxDigi: 0, 1, 0

TTGO: 0, 0.0196, 0

Aux: 0, 0.1, 0

Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)