MTHOOD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MTHOOD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761509487	0.05 Rx Erlang	0.01 Tx Erlang	53 count/10m	2 count/10m	8 count/10m
1761508287	0.08 Rx Erlang	0 Tx Erlang	77 count/10m	1 count/10m	3 count/10m
1761507087	0.09 Rx Erlang	0.01 Tx Erlang	76 count/10m	2 count/10m	7 count/10m
1761505886	0.09 Rx Erlang	0.01 Tx Erlang	89 count/10m	2 count/10m	9 count/10m
1761504687	0.06 Rx Erlang	0.01 Tx Erlang	50 count/10m	1 count/10m	4 count/10m
1761503487	0.07 Rx Erlang	0.01 Tx Erlang	56 count/10m	2 count/10m	6 count/10m
1761502287	0.07 Rx Erlang	0.01 Tx Erlang	76 count/10m	1 count/10m	10 count/10m
1761499886	0.08 Rx Erlang	0.01 Tx Erlang	87 count/10m	1 count/10m	5 count/10m
1761497486	0.07 Rx Erlang	0.01 Tx Erlang	76 count/10m	1 count/10m	3 count/10m
1761495086	0.05 Rx Erlang	0.01 Tx Erlang	51 count/10m	1 count/10m	6 count/10m
1761493886	0.07 Rx Erlang	0.01 Tx Erlang	64 count/10m	0 count/10m	3 count/10m
1761492686	0.06 Rx Erlang	0.01 Tx Erlang	62 count/10m	2 count/10m	5 count/10m
1761491486	0.06 Rx Erlang	0.01 Tx Erlang	56 count/10m	1 count/10m	6 count/10m
1761490286	0.05 Rx Erlang	0 Tx Erlang	51 count/10m	0 count/10m	4 count/10m
1761487886	0.07 Rx Erlang	0.01 Tx Erlang	68 count/10m	1 count/10m	6 count/10m
1761486686	0.06 Rx Erlang	0 Tx Erlang	59 count/10m	1 count/10m	3 count/10m
1761485486	0.06 Rx Erlang	0.01 Tx Erlang	56 count/10m	2 count/10m	6 count/10m
1761480686	0.07 Rx Erlang	0.01 Tx Erlang	70 count/10m	2 count/10m	8 count/10m
1761477086	0.06 Rx Erlang	0.01 Tx Erlang	57 count/10m	3 count/10m	8 count/10m
1761474686	0.06 Rx Erlang	0.01 Tx Erlang	50 count/10m	0 count/10m	7 count/10m
1761473487	0.06 Rx Erlang	0.01 Tx Erlang	57 count/10m	3 count/10m	5 count/10m
1761469886	0.08 Rx Erlang	0.01 Tx Erlang	71 count/10m	2 count/10m	8 count/10m
1761468686	0.06 Rx Erlang	0.01 Tx Erlang	63 count/10m	1 count/10m	4 count/10m
1761467489	0.05 Rx Erlang	0.01 Tx Erlang	53 count/10m	1 count/10m	8 count/10m
1761463886	0.07 Rx Erlang	0.01 Tx Erlang	53 count/10m	0 count/10m	8 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)