WILLAM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WILLAM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1753646967	0.08 Rx Erlang	0.02 Tx Erlang	65 count/10m	19 count/10m	18 count/10m
1753645767	0.07 Rx Erlang	0.02 Tx Erlang	64 count/10m	18 count/10m	16 count/10m
1753644567	0.08 Rx Erlang	0.03 Tx Erlang	71 count/10m	29 count/10m	25 count/10m
1753643397	0.08 Rx Erlang	0.02 Tx Erlang	75 count/10m	21 count/10m	22 count/10m
1753642167	0.07 Rx Erlang	0.03 Tx Erlang	63 count/10m	18 count/10m	20 count/10m
1753640967	0.06 Rx Erlang	0.02 Tx Erlang	65 count/10m	13 count/10m	19 count/10m
1753639767	0.08 Rx Erlang	0.02 Tx Erlang	68 count/10m	16 count/10m	18 count/10m
1753638567	0.08 Rx Erlang	0.03 Tx Erlang	69 count/10m	16 count/10m	26 count/10m
1753637367	0.06 Rx Erlang	0.02 Tx Erlang	56 count/10m	21 count/10m	20 count/10m
1753636167	0.06 Rx Erlang	0.02 Tx Erlang	53 count/10m	10 count/10m	22 count/10m
1753634967	0.09 Rx Erlang	0.04 Tx Erlang	78 count/10m	23 count/10m	29 count/10m
1753633767	0.08 Rx Erlang	0.03 Tx Erlang	72 count/10m	11 count/10m	24 count/10m
1753632567	0.06 Rx Erlang	0.03 Tx Erlang	57 count/10m	11 count/10m	25 count/10m
1753631367	0.06 Rx Erlang	0.02 Tx Erlang	53 count/10m	7 count/10m	17 count/10m
1753630167	0.06 Rx Erlang	0.02 Tx Erlang	56 count/10m	8 count/10m	16 count/10m
1753628967	0.05 Rx Erlang	0.02 Tx Erlang	48 count/10m	9 count/10m	18 count/10m
1753627767	0.06 Rx Erlang	0.02 Tx Erlang	62 count/10m	9 count/10m	19 count/10m
1753626567	0.06 Rx Erlang	0.02 Tx Erlang	48 count/10m	10 count/10m	13 count/10m
1753625367	0.06 Rx Erlang	0.02 Tx Erlang	51 count/10m	13 count/10m	19 count/10m
1753624167	0.06 Rx Erlang	0.02 Tx Erlang	55 count/10m	17 count/10m	20 count/10m
1753622967	0.09 Rx Erlang	0.03 Tx Erlang	89 count/10m	28 count/10m	33 count/10m
1753621767	0.05 Rx Erlang	0.02 Tx Erlang	50 count/10m	9 count/10m	22 count/10m
1753620567	0.06 Rx Erlang	0.02 Tx Erlang	52 count/10m	10 count/10m	17 count/10m
1753619382	0.06 Rx Erlang	0.02 Tx Erlang	49 count/10m	11 count/10m	17 count/10m
1753618167	0.05 Rx Erlang	0.02 Tx Erlang	48 count/10m	10 count/10m	14 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)