DL8YBQ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL8YBQ-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1780250701	1005.3 hPa	26.7 C deg	36.3 %	214 -	0 C deg
1780248886	1005 hPa	27.1 C deg	36.9 %	212 -	0 C deg
1780247133	1004.8 hPa	28.5 C deg	34.8 %	252 -	0 C deg
1780246421	1004.7 hPa	28.3 C deg	34.5 %	215 -	0 C deg
1780244606	1004.4 hPa	27.9 C deg	37.5 %	211 -	0 C deg
1780242791	1004.4 hPa	29.6 C deg	35.3 %	206 -	0 C deg
1780240975	1004.3 hPa	29.6 C deg	34.9 %	219 -	0 C deg
1780239160	1004.1 hPa	31.4 C deg	33.1 %	213 -	0 C deg
1780237345	1004.1 hPa	30.8 C deg	33.7 %	216 -	0 C deg
1780235530	1004 hPa	30.4 C deg	34.8 %	208 -	0 C deg
1780233715	1004 hPa	32 C deg	33 %	202 -	0 C deg
1780231900	1003.8 hPa	29.5 C deg	37 %	206 -	0 C deg
1780230085	1004 hPa	33.4 C deg	32.5 %	194 -	0 C deg
1780228270	1004.1 hPa	31.8 C deg	34.1 %	188 -	0 C deg
1780226454	1004.1 hPa	29.6 C deg	38 %	194 -	0 C deg
1780224639	1004 hPa	28.1 C deg	41.2 %	205 -	0 C deg
1780222824	1004 hPa	27.4 C deg	42.7 %	209 -	0 C deg
1780221009	1004 hPa	32.3 C deg	33.2 %	206 -	0 C deg
1780219194	1004.1 hPa	32.2 C deg	33.6 %	210 -	0 C deg
1780217379	1004.3 hPa	35.1 C deg	29.6 %	197 -	0 C deg
1780215564	1004.7 hPa	35.3 C deg	29.2 %	189 -	0 C deg
1780213749	1004.9 hPa	34.2 C deg	30.7 %	184 -	0 C deg
1780211934	1004.8 hPa	26.3 C deg	42.3 %	199 -	0 C deg
1780210118	1004.8 hPa	24.7 C deg	43.7 %	196 -	0 C deg
1780208303	1004.8 hPa	22.3 C deg	49.7 %	202 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)