BH2WAV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BH2WAV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU-Used*	CPU-Temp*	MEM-Used*	UpSpeed*	DownSpeed*
1761554105	22.11 %	42 C	26 %	1.88 KBps	0.7 KBps
1761553205	3.02 %	41 C	25 %	1.73 KBps	38.96 KBps
1761552305	22.89 %	42 C	25 %	225.69 KBps	51.33 KBps
1761551490	22.89 %	43 C	25 %	10.59 KBps	13.81 KBps
1761550502	18.59 %	41 C	25 %	13.21 KBps	6.26 KBps
1761549602	25.37 %	41 C	25 %	173.23 KBps	24.27 KBps
1761548706	3.5 %	40 C	25 %	28.26 KBps	23.6 KBps
1761546911	18.59 %	41 C	25 %	25.46 KBps	34.63 KBps
1761546004	1 %	42 C	25 %	24.98 KBps	21.04 KBps
1761545102	2.5 %	40 C	25 %	9.93 KBps	2.48 KBps
1761544203	22.11 %	41 C	25 %	1.1 KBps	0.91 KBps
1761543302	6.5 %	39 C	25 %	2.49 KBps	7.34 KBps
1761542404	1.5 %	38 C	25 %	0.16 KBps	11.42 KBps
1761541502	22.39 %	40 C	25 %	0.94 KBps	0.62 KBps
1761540606	3.5 %	38 C	25 %	0.27 KBps	0.77 KBps
1761539702	21.78 %	37 C	25 %	0.13 KBps	0.12 KBps
1761538802	24 %	39 C	25 %	0.09 KBps	0.08 KBps
1761537901	21.61 %	38 C	25 %	0.03 KBps	0.05 KBps
1761537004	4.48 %	37 C	25 %	1.8 KBps	0.54 KBps
1761536105	22.89 %	37 C	25 %	1.82 KBps	0.55 KBps
1761535209	24.12 %	40 C	25 %	0.13 KBps	0.13 KBps
1761534302	20.71 %	40 C	25 %	0.03 KBps	0.05 KBps
1761533402	3 %	38 C	25 %	1.19 KBps	0.9 KBps
1761532501	17.91 %	38 C	25 %	1.43 KBps	2.82 KBps
1761531605	27.5 %	38 C	25 %	162.41 KBps	31 KBps

*Used Equation Coefficients:

CPU-Used: 0, 1, 0

CPU-Temp: 0, 1, 0

MEM-Used: 0, 1, 0

UpSpeed: 0, 1, 0

DownSpeed: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)