BH2WAV-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BH2WAV-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU-Used*	MEM-Used*	UpSpeed*	DownSpeed*
1789950605	11.11 %	29 %	15.23 KBps	9 KBps
1789949704	19.8 %	29 %	14.09 KBps	8.2 KBps
1789948811	11.59 %	29 %	15.72 KBps	8.95 KBps
1789947907	23.12 %	29 %	12.12 KBps	8.56 KBps
1789947005	17.09 %	29 %	11.7 KBps	8.36 KBps
1789946106	18.73 %	29 %	5.58 KBps	3.98 KBps
1789945209	0.25 %	29 %	3.3 KBps	2.42 KBps
1789944310	3.27 %	29 %	2.37 KBps	2.06 KBps
1789943405	21.36 %	29 %	2.81 KBps	2.19 KBps
1789942508	3.01 %	29 %	3.01 KBps	2.13 KBps
1789941611	10.78 %	29 %	1.81 KBps	1.34 KBps
1789940709	9.52 %	29 %	1.84 KBps	1.1 KBps
1789939807	34.17 %	29 %	1.04 KBps	0.97 KBps
1789938905	16.21 %	29 %	2.19 KBps	1.59 KBps
1789938005	11.75 %	29 %	2.58 KBps	1.96 KBps
1789937105	12.66 %	29 %	1.42 KBps	1.03 KBps
1789936205	0 %	29 %	1.32 KBps	1.02 KBps
1789935305	16.67 %	29 %	1.6 KBps	1.24 KBps
1789934408	0.75 %	29 %	1.26 KBps	1.03 KBps
1789933505	2.25 %	29 %	1.21 KBps	1.24 KBps
1789932607	7.54 %	29 %	2.25 KBps	1.74 KBps
1789931706	8.77 %	29 %	2.43 KBps	1.59 KBps
1789930810	0 %	29 %	1.49 KBps	1.19 KBps
1789929908	8.52 %	29 %	1.2 KBps	1.1 KBps
1789929008	5.76 %	29 %	1.7 KBps	1.16 KBps

*Used Equation Coefficients:

CPU-Used: 0, 1, 0

CPU-Temp: 0, 1, 0

MEM-Used: 0, 1, 0

UpSpeed: 0, 1, 0

DownSpeed: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)