DD3QQ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DD3QQ-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1757579168	997 hPa	22 C deg	36.9 %	1005.4 hPa	0 C deg
1757577368	996.8 hPa	22.5 C deg	36.1 %	1005.2 hPa	0 C deg
1757575568	996.5 hPa	22 C deg	37 %	1004.9 hPa	0 C deg
1757573768	996.2 hPa	21.7 C deg	37 %	1004.6 hPa	0 C deg
1757570168	995.5 hPa	21.1 C deg	36.8 %	1003.9 hPa	0 C deg
1757568368	995.2 hPa	21.9 C deg	34.3 %	1003.6 hPa	0 C deg
1757566568	995.1 hPa	22 C deg	34.1 %	1003.5 hPa	0 C deg
1757564768	995.2 hPa	21.9 C deg	34.1 %	1003.6 hPa	0 C deg
1757562968	995.1 hPa	22 C deg	33.8 %	1003.6 hPa	0 C deg
1757561168	995.1 hPa	22.1 C deg	33.8 %	1003.5 hPa	0 C deg
1757559368	995.3 hPa	22.2 C deg	33.6 %	1003.7 hPa	0 C deg
1757557568	995.4 hPa	22.2 C deg	33.5 %	1003.9 hPa	0 C deg
1757555768	995.5 hPa	22.2 C deg	33.4 %	1004 hPa	0 C deg
1757553967	995.7 hPa	22.3 C deg	33.1 %	1004.1 hPa	0 C deg
1757552168	996.1 hPa	22.2 C deg	33.1 %	1004.5 hPa	0 C deg
1757550367	996.3 hPa	22.1 C deg	33 %	1004.7 hPa	0 C deg
1757548564	996.5 hPa	22.2 C deg	32.7 %	1005 hPa	0 C deg
1757546764	996.7 hPa	22.1 C deg	32.5 %	1005.2 hPa	0 C deg
1757544964	997 hPa	22.1 C deg	32.2 %	1005.4 hPa	0 C deg
1757543164	997.3 hPa	22.2 C deg	31.7 %	1005.7 hPa	0 C deg
1757541364	997.5 hPa	22.2 C deg	31.3 %	1005.9 hPa	0 C deg
1757539564	997.6 hPa	22.3 C deg	30.8 %	1006.1 hPa	0 C deg
1757537764	997.9 hPa	22.2 C deg	30.6 %	1006.3 hPa	0 C deg
1757535964	998 hPa	22.4 C deg	30 %	1006.4 hPa	0 C deg
1757534164	998.2 hPa	22.8 C deg	29.6 %	1006.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)