SP6AB-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6AB-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1755922201	19 Deg.C	4 %
1755921605	19 Deg.C	4 %
1755921001	20 Deg.C	4 %
1755920402	19 Deg.C	4 %
1755919807	19 Deg.C	4 %
1755919201	19 Deg.C	4 %
1755918605	20 Deg.C	4 %
1755918002	19 Deg.C	4 %
1755917406	18 Deg.C	4 %
1755916802	20 Deg.C	4 %
1755916205	20 Deg.C	4 %
1755915602	21 Deg.C	4 %
1755915006	21 Deg.C	4 %
1755914402	21 Deg.C	4 %
1755913805	20 Deg.C	4 %
1755913201	20 Deg.C	4 %
1755912602	20 Deg.C	4 %
1755912005	20 Deg.C	4 %
1755911401	19 Deg.C	4 %
1755910805	20 Deg.C	4 %
1755910202	19 Deg.C	4 %
1755909001	20 Deg.C	4 %
1755908402	20 Deg.C	4 %
1755907806	19 Deg.C	4 %
1755907201	19 Deg.C	4 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)