DF2AP-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF2AP-99. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1789942649	993.6 hPa	27.6 C deg	30.1 %	1027.4 hPa	0 C deg
1789940805	993.5 hPa	27.5 C deg	30.1 %	1027.3 hPa	0 C deg
1789940791	993.5 hPa	27.5 C deg	30.1 %	1027.3 hPa	0 C deg
1789938965	993.1 hPa	27.7 C deg	29.8 %	1026.9 hPa	0 C deg
1789937103	992.8 hPa	27.7 C deg	29.7 %	1026.6 hPa	0 C deg
1789935379	993 hPa	27.8 C deg	29.5 %	1026.7 hPa	0 C deg
1789935336	993 hPa	27.8 C deg	29.5 %	1026.7 hPa	0 C deg
1789933479	992.4 hPa	27.8 C deg	29.3 %	1026.2 hPa	0 C deg
1789932243	991.9 hPa	28.1 C deg	29 %	1025.7 hPa	0 C deg
1789932243	991.9 hPa	28.1 C deg	29 %	1025.7 hPa	0 C deg
1789930533	991.4 hPa	28.1 C deg	28.9 %	1025.1 hPa	0 C deg
1789929783	991.4 hPa	28.1 C deg	28.9 %	1025.1 hPa	0 C deg
1789928342	990.6 hPa	28.1 C deg	28.7 %	1024.3 hPa	0 C deg
1789928039	990.6 hPa	28.1 C deg	28.7 %	1024.3 hPa	0 C deg
1789926604	990.1 hPa	28 C deg	28.3 %	1023.8 hPa	0 C deg
1789926246	990.1 hPa	28 C deg	28.3 %	1023.8 hPa	0 C deg
1789924303	989.6 hPa	28 C deg	28.2 %	1023.2 hPa	0 C deg
1789922896	988.9 hPa	28.1 C deg	28.2 %	1022.5 hPa	0 C deg
1789922463	988.9 hPa	28.1 C deg	28.2 %	1022.5 hPa	0 C deg
1789921589	988.3 hPa	28 C deg	28.3 %	1021.9 hPa	0 C deg
1789918817	987.9 hPa	27.9 C deg	28.4 %	1021.5 hPa	0 C deg
1789916986	987.6 hPa	28.2 C deg	28 %	1021.2 hPa	0 C deg
1789914005	987 hPa	28.1 C deg	28.2 %	1020.5 hPa	0 C deg
1789913340	987 hPa	28.1 C deg	28.2 %	1020.5 hPa	0 C deg
1789911529	987.1 hPa	27.9 C deg	28.3 %	1020.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)