SQ8AQL-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ8AQL-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1789971001	53 Deg.C	2 %
1789970401	52 Deg.C	2 %
1789969805	53 Deg.C	2 %
1789969202	53 Deg.C	2 %
1789968604	52 Deg.C	2 %
1789968001	52 Deg.C	2 %
1789967405	53 Deg.C	2 %
1789966802	54 Deg.C	2 %
1789966202	54 Deg.C	2 %
1789965604	53 Deg.C	2 %
1789965001	52 Deg.C	2 %
1789964404	53 Deg.C	2 %
1789963802	53 Deg.C	2 %
1789963205	51 Deg.C	2 %
1789962601	53 Deg.C	2 %
1789962001	51 Deg.C	2 %
1789961404	52 Deg.C	2 %
1789960801	53 Deg.C	2 %
1789960205	53 Deg.C	2 %
1789959601	54 Deg.C	2 %
1789959004	54 Deg.C	2 %
1789958401	52 Deg.C	2 %
1789957801	53 Deg.C	2 %
1789957204	52 Deg.C	2 %
1789956602	52 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)