EA3BNF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA3BNF-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Radiacion*	VOC*	CH4*
1773147495	0.23 uSv/h	63001 ohm	0 ppm
1773146222	0.28 uSv/h	61504 ohm	0 ppm
1773145585	0.25 uSv/h	61009 ohm	0 ppm
1773144948	0.19 uSv/h	61504 ohm	0 ppm
1773143675	0.25 uSv/h	60025 ohm	0 ppm
1773143038	0.25 uSv/h	59049 ohm	0 ppm
1773142402	0.23 uSv/h	61504 ohm	0 ppm
1773141765	0.26 uSv/h	64009 ohm	0 ppm
1773141128	0.24 uSv/h	61009 ohm	0 ppm
1773140492	0.21 uSv/h	63504 ohm	0 ppm
1773139854	0.22 uSv/h	64009 ohm	0 ppm
1773139218	0.25 uSv/h	65025 ohm	2147483600 ppm
1773138581	0.26 uSv/h	63504 ohm	0 ppm
1773137944	0.23 uSv/h	64516 ohm	0 ppm
1773137308	0.25 uSv/h	65536 ohm	2147483600 ppm
1773136671	0.28 uSv/h	65025 ohm	0 ppm
1773136034	0.25 uSv/h	66564 ohm	0 ppm
1773135398	0.25 uSv/h	67600 ohm	0 ppm
1773134761	0.19 uSv/h	68121 ohm	0 ppm
1773134125	0.26 uSv/h	67081 ohm	0 ppm
1773133487	0.15 uSv/h	67600 ohm	0 ppm
1773132851	0.2 uSv/h	67081 ohm	0 ppm
1773132214	0.26 uSv/h	63001 ohm	0 ppm
1773130943	0.25 uSv/h	65025 ohm	0 ppm
1773130304	0.28 uSv/h	66049 ohm	0 ppm

*Used Equation Coefficients:

Radiacion: 0, 0.01, 0

VOC: 1, 0, 0

CH4: 0, 1, 0

H2: 0, 1, 0

CO: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)