YM2KF-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2KF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1761548404	23 Pkt	1 Pkt	-65 dBm	14.23 V
1761547712	19 Pkt	1 Pkt	-66 dBm	14.56 V
1761547022	19 Pkt	3 Pkt	-64 dBm	14.54 V
1761546329	19 Pkt	1 Pkt	-65 dBm	14.52 V
1761545638	19 Pkt	2 Pkt	-64 dBm	14.54 V
1761544947	21 Pkt	1 Pkt	-66 dBm	14.54 V
1761544256	21 Pkt	1 Pkt	-67 dBm	14.54 V
1761543564	22 Pkt	3 Pkt	-66 dBm	14.56 V
1761542872	19 Pkt	0 Pkt	-63 dBm	14.56 V
1761542180	28 Pkt	1 Pkt	-64 dBm	14.56 V
1761541489	19 Pkt	3 Pkt	-63 dBm	14.54 V
1761540797	19 Pkt	1 Pkt	-64 dBm	14.56 V
1761540105	24 Pkt	2 Pkt	-69 dBm	14.54 V
1761539415	20 Pkt	1 Pkt	-74 dBm	14.52 V
1761538722	16 Pkt	1 Pkt	-73 dBm	14.56 V
1761538030	17 Pkt	3 Pkt	-66 dBm	14.52 V
1761537338	19 Pkt	1 Pkt	-74 dBm	14.56 V
1761536646	16 Pkt	2 Pkt	-72 dBm	14.54 V
1761535954	18 Pkt	1 Pkt	-67 dBm	14.56 V
1761535263	18 Pkt	1 Pkt	-68 dBm	14.54 V
1761534572	17 Pkt	4 Pkt	-64 dBm	14.52 V
1761533880	17 Pkt	0 Pkt	-63 dBm	14.56 V
1761533188	18 Pkt	1 Pkt	-62 dBm	14.46 V
1761532497	16 Pkt	3 Pkt	-66 dBm	14.56 V
1761531805	18 Pkt	1 Pkt	-63 dBm	14.58 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)