PU2XTC-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PU2XTC-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Load*	RAM*	RSSI*	Ping*
1781305977	63 deg.C	0.1 val	41 %	-29 dBm	4 ms
1781305677	63 deg.C	0.11 val	41 %	-27 dBm	7 ms
1781302392	61 deg.C	0.4 val	41 %	-37 dBm	9 ms
1781302092	61 deg.C	0.56 val	40 %	-37 dBm	6 ms
1781301792	61 deg.C	0.58 val	40 %	-30 dBm	5 ms
1781259653	60 deg.C	0.18 val	38 %	-50 dBm	5 ms
1781259353	60 deg.C	0.21 val	39 %	-43 dBm	0 ms
1781259053	60 deg.C	0.24 val	39 %	-42 dBm	4 ms
1781258753	61 deg.C	0.4 val	39 %	-45 dBm	3 ms
1781258453	61 deg.C	0.21 val	39 %	-42 dBm	5 ms
1781258153	61 deg.C	0.14 val	40 %	-40 dBm	5 ms
1781257853	61 deg.C	0.09 val	39 %	-40 dBm	7 ms
1781257566	61 deg.C	0.1 val	39 %	-37 dBm	7 ms
1781256960	61 deg.C	0.12 val	40 %	-34 dBm	5 ms
1781256660	61 deg.C	0.53 val	39 %	-30 dBm	5 ms
1781256360	61 deg.C	0.06 val	39 %	-32 dBm	0 ms
1781256060	61 deg.C	0.23 val	39 %	-30 dBm	5 ms
1781255760	61 deg.C	0.3 val	39 %	-34 dBm	4 ms
1781255460	61 deg.C	0.16 val	39 %	-35 dBm	14 ms
1781255160	61 deg.C	0.21 val	40 %	-32 dBm	19 ms
1781254860	61 deg.C	0.27 val	39 %	-34 dBm	3 ms
1781254260	60 deg.C	0.35 val	40 %	-34 dBm	4 ms
1781253960	60 deg.C	0.15 val	39 %	-32 dBm	4 ms
1781253660	60 deg.C	0.34 val	39 %	-34 dBm	5 ms
1781253360	60 deg.C	0.31 val	40 %	-29 dBm	5 ms

*Used Equation Coefficients:

Temp: 0, 1, 0

Load: 0, 0.01, 0

RAM: 0, 1, 0

RSSI: 0, -1, 0

Ping: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)