YF9UAG-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YF9UAG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Press*
1777027163	28 degC	94 %RH	1010 hPa
1777027042	29 degC	94 %RH	1010 hPa
1777026920	29 degC	94 %RH	1010 hPa
1777026799	29 degC	94 %RH	1010 hPa
1777026678	29 degC	94 %RH	1010 hPa
1777026557	29 degC	95 %RH	1010 hPa
1777026436	29 degC	94 %RH	1010 hPa
1777026315	29 degC	95 %RH	1010 hPa
1777026194	29 degC	95 %RH	1010 hPa
1777026073	29 degC	95 %RH	1010 hPa
1777025952	28 degC	96 %RH	1010 hPa
1777025831	28 degC	95 %RH	1010 hPa
1777025710	28 degC	95 %RH	1010 hPa
1777025589	28 degC	96 %RH	1010 hPa
1777025468	28 degC	96 %RH	1009 hPa
1777025347	29 degC	96 %RH	1009 hPa
1777025227	29 degC	96 %RH	1009 hPa
1777025105	29 degC	96 %RH	1009 hPa
1777024984	29 degC	96 %RH	1009 hPa
1777024862	29 degC	95 %RH	1009 hPa
1777024741	29 degC	95 %RH	1009 hPa
1777024620	29 degC	95 %RH	1009 hPa
1777024499	29 degC	95 %RH	1009 hPa
1777024378	29 degC	95 %RH	1009 hPa
1777024257	29 degC	94 %RH	1009 hPa

*Used Equation Coefficients:

Temp: 0, 1, -100

Hum: 0, 1, 0

Press: 0, 1, 850

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)