DO7DH-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO7DH-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Brightness*	RSSI*
1780594217	13.3 V	9 %	-71 dBm
1780593929	13.3 V	8 %	-72 dBm
1780593610	13.3 V	7 %	-72 dBm
1780593346	13.3 V	8 %	-72 dBm
1780593052	13.3 V	8 %	-72 dBm
1780592717	13.3 V	9 %	-72 dBm
1780592453	13.3 V	9 %	-71 dBm
1780592130	13.3 V	8 %	-72 dBm
1780591811	13.3 V	7 %	-73 dBm
1780591548	13.3 V	7 %	-71 dBm
1780591213	13.3 V	9 %	-70 dBm
1780590943	13.3 V	10 %	-72 dBm
1780590642	13.3 V	9 %	-72 dBm
1780590319	13.3 V	10 %	-73 dBm
1780590012	13.3 V	11 %	-71 dBm
1780589742	13.3 V	12 %	-72 dBm
1780589419	13.3 V	11 %	-72 dBm
1780589127	13.3 V	10 %	-72 dBm
1780588829	13.3 V	11 %	-71 dBm
1780588518	13.3 V	15 %	-72 dBm
1780588231	13.3 V	22 %	-70 dBm
1780587902	13.3 V	23 %	-71 dBm
1780587647	13.3 V	25 %	-70 dBm
1780587339	13.3 V	27 %	-71 dBm
1780587032	13.3 V	35 %	-72 dBm

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Brightness: 0, 1, 0

RSSI: 0, -1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)