SR2GKG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1772579657	63 Count	101 Count	62 Count	4.41 VDC
1772577857	32 Count	54 Count	32 Count	4.4 VDC
1772576056	501 Count	1008 Count	481 Count	4.41 VDC
1772574255	477 Count	971 Count	458 Count	4.39 VDC
1772572455	447 Count	924 Count	429 Count	4.41 VDC
1772570654	422 Count	882 Count	405 Count	4.41 VDC
1772568853	394 Count	831 Count	378 Count	4.39 VDC
1772567053	364 Count	779 Count	349 Count	4.4 VDC
1772565252	336 Count	730 Count	322 Count	4.41 VDC
1772563451	309 Count	678 Count	296 Count	4.42 VDC
1772540057	224 Count	807 Count	212 Count	4.4 VDC
1772538256	204 Count	728 Count	193 Count	4.39 VDC
1772536455	187 Count	662 Count	177 Count	4.39 VDC
1772534655	168 Count	592 Count	159 Count	4.39 VDC
1772532854	146 Count	508 Count	138 Count	4.4 VDC
1772531053	121 Count	408 Count	114 Count	4.4 VDC
1772529253	96 Count	281 Count	93 Count	4.4 VDC
1772527452	65 Count	162 Count	63 Count	4.41 VDC
1772525651	31 Count	52 Count	31 Count	4.38 VDC
1772523850	633 Count	1044 Count	604 Count	4.4 VDC
1772522050	601 Count	989 Count	573 Count	4.4 VDC
1772520249	567 Count	930 Count	540 Count	4.41 VDC
1772518456	529 Count	868 Count	507 Count	4.38 VDC
1772516655	496 Count	811 Count	475 Count	4.42 VDC
1772514854	471 Count	765 Count	451 Count	4.42 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)