SP2GPU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1773109571	202 Count	630 Count	40 Count	4.21 VDC
1773108670	201 Count	630 Count	40 Count	4.19 VDC
1773107769	200 Count	630 Count	40 Count	4.18 VDC
1773106869	199 Count	630 Count	40 Count	4.19 VDC
1773105968	198 Count	630 Count	40 Count	4.18 VDC
1773105067	197 Count	630 Count	40 Count	4.22 VDC
1773104166	196 Count	630 Count	40 Count	4.21 VDC
1773103265	195 Count	630 Count	40 Count	4.17 VDC
1773102364	194 Count	630 Count	40 Count	4.19 VDC
1773101464	193 Count	630 Count	40 Count	4.22 VDC
1773100563	192 Count	630 Count	40 Count	4.17 VDC
1773099661	191 Count	630 Count	40 Count	4.22 VDC
1773098760	190 Count	630 Count	40 Count	4.21 VDC
1773097859	189 Count	630 Count	40 Count	4.18 VDC
1773096958	188 Count	630 Count	40 Count	4.18 VDC
1773096058	187 Count	630 Count	40 Count	4.17 VDC
1773095157	186 Count	630 Count	40 Count	4.2 VDC
1773094256	185 Count	630 Count	40 Count	4.17 VDC
1773093355	184 Count	630 Count	40 Count	4.2 VDC
1773092454	183 Count	627 Count	40 Count	4.19 VDC
1773091554	181 Count	626 Count	39 Count	4.22 VDC
1773090656	180 Count	626 Count	39 Count	4.2 VDC
1773089752	179 Count	626 Count	39 Count	4.18 VDC
1773088851	178 Count	626 Count	39 Count	4.21 VDC
1773087950	177 Count	626 Count	39 Count	4.17 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)