IW6DRY-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW6DRY-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BattV*	LoadW*	TempOut*	PressOut*
1784711517	12.89 V	47.06 W	29.14 degC	1020 hPa
1784711337	12.89 V	70.59 W	28.86 degC	1020 hPa
1784711158	12.89 V	105.88 W	28.86 degC	1020 hPa
1784710977	12.89 V	82.35 W	28.86 degC	1020 hPa
1784710797	12.89 V	82.35 W	28.86 degC	1020 hPa
1784710617	12.89 V	70.59 W	29.14 degC	1020 hPa
1784710438	12.89 V	70.59 W	28.86 degC	1020 hPa
1784710257	12.89 V	58.82 W	28.86 degC	1020 hPa
1784710077	12.89 V	58.82 W	28.86 degC	1020 hPa
1784709898	12.89 V	82.35 W	28.86 degC	1020 hPa
1784709717	12.89 V	70.59 W	28.86 degC	1020 hPa
1784709537	12.89 V	47.06 W	28.86 degC	1020 hPa
1784709357	12.89 V	58.82 W	28.59 degC	1020 hPa
1784709177	12.89 V	70.59 W	28.59 degC	1020 hPa
1784708997	12.89 V	47.06 W	28.59 degC	1020 hPa
1784708817	12.89 V	58.82 W	28.31 degC	1020 hPa
1784708637	12.89 V	58.82 W	28.59 degC	1020 hPa
1784708457	12.89 V	58.82 W	28.31 degC	1020 hPa
1784708277	12.89 V	82.35 W	28.31 degC	1020 hPa
1784708097	12.89 V	82.35 W	28.31 degC	1020 hPa
1784707917	12.89 V	70.59 W	28.31 degC	1020 hPa
1784707737	12.89 V	70.59 W	28.04 degC	1020 hPa
1784707558	12.89 V	82.35 W	28.04 degC	1020 hPa
1784707378	12.89 V	70.59 W	27.76 degC	1020 hPa
1784707198	12.89 V	70.59 W	27.76 degC	1020 hPa

*Used Equation Coefficients:

BattV: 0, 0.0215686, 10

LoadW: 0, 11.764706, 0

SolarW: 0, 4.7058825, 0

TempOut: 0, 0.2745098, -20

PressOut: 0, 0.7843137, 900

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)