DB0BQ-99 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0BQ-99. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1753684769	1009.1 hPa	27.5 C deg	40 %	1016.9 hPa	0 C deg
1753682969	1009 hPa	27.5 C deg	39.4 %	1016.8 hPa	0 C deg
1753681169	1008.8 hPa	27.5 C deg	39.1 %	1016.6 hPa	0 C deg
1753679368	1008.6 hPa	27.6 C deg	38.8 %	1016.4 hPa	0 C deg
1753677568	1008.6 hPa	27.6 C deg	38.5 %	1016.4 hPa	0 C deg
1753675768	1008.3 hPa	27.5 C deg	38.5 %	1016.1 hPa	0 C deg
1753673968	1008.2 hPa	27.7 C deg	38.3 %	1016 hPa	0 C deg
1753672168	1008.1 hPa	27.7 C deg	38.4 %	1015.9 hPa	0 C deg
1753670368	1008.1 hPa	27.8 C deg	38.4 %	1015.9 hPa	0 C deg
1753668568	1008.1 hPa	27.8 C deg	38.6 %	1015.9 hPa	0 C deg
1753666768	1008.1 hPa	28 C deg	38.5 %	1015.9 hPa	0 C deg
1753664968	1008 hPa	28 C deg	38.6 %	1015.8 hPa	0 C deg
1753663168	1007.8 hPa	28 C deg	38.6 %	1015.6 hPa	0 C deg
1753661367	1007.8 hPa	28 C deg	38.4 %	1015.6 hPa	0 C deg
1753659567	1008 hPa	28.2 C deg	38.1 %	1015.7 hPa	0 C deg
1753655967	1007.8 hPa	28.3 C deg	37.6 %	1015.6 hPa	0 C deg
1753654167	1007.8 hPa	28.4 C deg	37.5 %	1015.6 hPa	0 C deg
1753652367	1007.7 hPa	28.4 C deg	38 %	1015.5 hPa	0 C deg
1753650567	1007.5 hPa	28.6 C deg	36.8 %	1015.3 hPa	0 C deg
1753648767	1007.4 hPa	28.7 C deg	36.5 %	1015.2 hPa	0 C deg
1753646967	1007.2 hPa	28.8 C deg	36.2 %	1014.9 hPa	0 C deg
1753645167	1007.1 hPa	28.7 C deg	36.5 %	1014.8 hPa	0 C deg
1753643397	1006.8 hPa	28.9 C deg	36.6 %	1014.6 hPa	0 C deg
1753641567	1006.6 hPa	28.9 C deg	36.8 %	1014.3 hPa	0 C deg
1753639766	1006.5 hPa	29.1 C deg	36 %	1014.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)