XE2RCS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2RCS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	TxP*
1772914501	0.41 Load	62.3 DegC	77 Mb	1 Pkt
1772914202	0.33 Load	62.3 DegC	77 Mb	0 Pkt
1772913901	0.39 Load	62.3 DegC	78 Mb	0 Pkt
1772913602	0.36 Load	62.3 DegC	78 Mb	1 Pkt
1772913301	0.4 Load	62.3 DegC	77 Mb	0 Pkt
1772913002	0.4 Load	62.3 DegC	81 Mb	1 Pkt
1772912701	0.4 Load	62.3 DegC	78 Mb	0 Pkt
1772912401	0.46 Load	61.22 DegC	79 Mb	0 Pkt
1772912102	0.41 Load	62.3 DegC	62 Mb	1 Pkt
1772911802	0.32 Load	62.3 DegC	77 Mb	0 Pkt
1772911502	0.37 Load	61.22 DegC	63 Mb	0 Pkt
1772911201	0.39 Load	61.22 DegC	78 Mb	1 Pkt
1772910902	0.35 Load	62.3 DegC	63 Mb	0 Pkt
1772910601	0.35 Load	61.76 DegC	78 Mb	1 Pkt
1772910302	0.45 Load	61.76 DegC	62 Mb	0 Pkt
1772910002	0.41 Load	62.3 DegC	62 Mb	1 Pkt
1772909701	0.39 Load	61.22 DegC	63 Mb	0 Pkt
1772909402	0.32 Load	61.76 DegC	62 Mb	1 Pkt
1772909101	0.25 Load	61.22 DegC	78 Mb	0 Pkt
1772908802	0.23 Load	61.76 DegC	62 Mb	0 Pkt
1772908502	0.31 Load	61.22 DegC	63 Mb	0 Pkt
1772908201	0.32 Load	61.76 DegC	62 Mb	0 Pkt
1772907902	0.35 Load	61.76 DegC	63 Mb	0 Pkt
1772907602	0.4 Load	62.3 DegC	62 Mb	1 Pkt
1772907301	0.35 Load	61.22 DegC	55 Mb	0 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)