HS6PNA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6PNA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1787549636	34 Pkt	3 Pkt	-49 dBm	13.25 V
1787548706	22 Pkt	0 Pkt	-51 dBm	13.23 V
1787547777	29 Pkt	2 Pkt	-50 dBm	13.29 V
1787546849	22 Pkt	0 Pkt	-50 dBm	13.25 V
1787545920	5 Pkt	2 Pkt	-52 dBm	13.23 V
1787544995	12 Pkt	0 Pkt	-52 dBm	13.39 V
1787544068	5 Pkt	0 Pkt	-53 dBm	13.25 V
1787543144	8 Pkt	0 Pkt	-53 dBm	13.39 V
1787542217	5 Pkt	0 Pkt	-50 dBm	13.23 V
1787541293	10 Pkt	0 Pkt	-55 dBm	13.37 V
1787540368	18 Pkt	0 Pkt	-51 dBm	13.37 V
1787539439	5 Pkt	2 Pkt	-53 dBm	13.37 V
1787538513	12 Pkt	0 Pkt	-52 dBm	13.39 V
1787537588	9 Pkt	0 Pkt	-52 dBm	13.23 V
1787536662	4 Pkt	1 Pkt	-52 dBm	13.25 V
1787535738	12 Pkt	0 Pkt	-51 dBm	13.39 V
1787534811	4 Pkt	0 Pkt	-51 dBm	13.39 V
1787533885	3 Pkt	0 Pkt	-51 dBm	13.39 V
1787532960	17 Pkt	0 Pkt	-53 dBm	13.25 V
1787532035	16 Pkt	5 Pkt	-51 dBm	13.37 V
1787531108	5 Pkt	0 Pkt	-54 dBm	13.37 V
1787530183	16 Pkt	3 Pkt	-55 dBm	13.23 V
1787529256	22 Pkt	1 Pkt	-54 dBm	13.39 V
1787528329	23 Pkt	1 Pkt	-52 dBm	13.37 V
1787527402	16 Pkt	1 Pkt	-53 dBm	13.39 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)