DO2LRF-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO2LRF-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1785072506	1000.6 hPa	21 C deg	59.7 %	1008.4 hPa	0 C deg
1785070333	1000.7 hPa	20.7 C deg	57.7 %	1008.5 hPa	0 C deg
1785068503	1000.6 hPa	21.1 C deg	56.3 %	1008.4 hPa	0 C deg
1785066673	1000.7 hPa	21.4 C deg	55.5 %	1008.4 hPa	0 C deg
1785064843	1000.7 hPa	21.1 C deg	55.8 %	1008.5 hPa	0 C deg
1785063012	1000.6 hPa	20.6 C deg	57.5 %	1008.4 hPa	0 C deg
1785061197	1000.6 hPa	19.9 C deg	57 %	1008.4 hPa	0 C deg
1785059352	1000.9 hPa	19.6 C deg	56.4 %	1008.7 hPa	0 C deg
1785057521	1000.9 hPa	19.6 C deg	56.9 %	1008.7 hPa	0 C deg
1785055691	1001.2 hPa	19.8 C deg	55.8 %	1009.1 hPa	0 C deg
1785053861	1001.2 hPa	19.6 C deg	54.2 %	1009 hPa	0 C deg
1785052030	1001.1 hPa	19.4 C deg	53.4 %	1009 hPa	0 C deg
1785050200	1001.4 hPa	19.2 C deg	51.6 %	1009.3 hPa	0 C deg
1785048369	1001.5 hPa	18.9 C deg	50.5 %	1009.4 hPa	0 C deg
1785046539	1001.9 hPa	19 C deg	49.9 %	1009.8 hPa	0 C deg
1785044708	1001.6 hPa	19 C deg	50.2 %	1009.4 hPa	0 C deg
1785042878	1001.5 hPa	19 C deg	49.5 %	1009.4 hPa	0 C deg
1785041047	1001.6 hPa	19.1 C deg	49.2 %	1009.5 hPa	0 C deg
1785039218	1001.1 hPa	19 C deg	48.3 %	1009 hPa	0 C deg
1785037387	1001.6 hPa	19.4 C deg	47.7 %	1009.4 hPa	0 C deg
1785035557	1001.8 hPa	19.4 C deg	48.2 %	1009.7 hPa	0 C deg
1785033727	1002.1 hPa	19.5 C deg	47.6 %	1009.9 hPa	0 C deg
1785031897	1002.3 hPa	19.7 C deg	47.2 %	1010.1 hPa	0 C deg
1785030066	1002.3 hPa	19.8 C deg	47.4 %	1010.1 hPa	0 C deg
1785028236	1002.4 hPa	20.4 C deg	46.9 %	1010.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)