EL-IR3UCU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-IR3UCU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1787571556	0 RX Erlang	0.89 TX Erlang	0 RXcount/10m	13 TXcount/10m
1787570956	0 RX Erlang	0.92 TX Erlang	0 RXcount/10m	14 TXcount/10m
1787570356	0 RX Erlang	0.34 TX Erlang	0 RXcount/10m	9 TXcount/10m
1787569756	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	4 TXcount/10m
1787569156	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	8 TXcount/10m
1787568556	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1787567956	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	6 TXcount/10m
1787567356	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	10 TXcount/10m
1787566756	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	6 TXcount/10m
1787566156	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	6 TXcount/10m
1787565556	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1787564956	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	10 TXcount/10m
1787564356	0 RX Erlang	0.95 TX Erlang	0 RXcount/10m	10 TXcount/10m
1787563756	0 RX Erlang	0.87 TX Erlang	0 RXcount/10m	20 TXcount/10m
1787563156	0 RX Erlang	0.83 TX Erlang	0 RXcount/10m	22 TXcount/10m
1787562556	0 RX Erlang	0.54 TX Erlang	0 RXcount/10m	19 TXcount/10m
1787561956	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1787561356	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1787560756	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	8 TXcount/10m
1787560156	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	6 TXcount/10m
1787559556	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	11 TXcount/10m
1787558956	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	4 TXcount/10m
1787558356	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	13 TXcount/10m
1787557756	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	6 TXcount/10m
1787557156	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	12 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)