TA3KRT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3KRT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	AllCount*	AllDrop*
1761664857	7 Pkts	88 Pkts	62 Pkts
1761663057	1 Pkts	84 Pkts	54 Pkts
1761662457	5 Pkts	76 Pkts	46 Pkts
1761661857	5 Pkts	75 Pkts	43 Pkts
1761661257	4 Pkts	90 Pkts	51 Pkts
1761660657	1 Pkts	69 Pkts	48 Pkts
1761660057	3 Pkts	81 Pkts	57 Pkts
1761659457	0 Pkts	64 Pkts	52 Pkts
1761657657	5 Pkts	79 Pkts	49 Pkts
1761656457	6 Pkts	88 Pkts	77 Pkts
1761655857	7 Pkts	73 Pkts	47 Pkts
1761655257	7 Pkts	96 Pkts	52 Pkts
1761654657	3 Pkts	63 Pkts	46 Pkts
1761654057	5 Pkts	85 Pkts	53 Pkts
1761653457	1 Pkts	73 Pkts	49 Pkts
1761652857	3 Pkts	69 Pkts	44 Pkts
1761652259	9 Pkts	78 Pkts	42 Pkts
1761651657	1 Pkts	94 Pkts	68 Pkts
1761651057	5 Pkts	86 Pkts	62 Pkts
1761650457	4 Pkts	72 Pkts	49 Pkts
1761649857	13 Pkts	99 Pkts	53 Pkts
1761649257	16 Pkts	99 Pkts	56 Pkts
1761648057	11 Pkts	92 Pkts	57 Pkts
1761647457	7 Pkts	80 Pkts	56 Pkts
1761646857	10 Pkts	91 Pkts	69 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

RF->RF: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)