AC3CZ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AC3CZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*
1773053211	13.95 Volt	0 Pkt	33 Pcnt
1773052671	13.95 Volt	0 Pkt	25 Pcnt
1773051411	13.95 Volt	0 Pkt	20 Pcnt
1773051051	13.95 Volt	0 Pkt	20 Pcnt
1773049612	13.95 Volt	0 Pkt	50 Pcnt
1773049431	13.95 Volt	0 Pkt	57 Pcnt
1773047812	13.95 Volt	0 Pkt	50 Pcnt
1773047811	13.95 Volt	0 Pkt	50 Pcnt
1773046191	13.95 Volt	0 Pkt	50 Pcnt
1773046012	13.95 Volt	0 Pkt	42 Pcnt
1773044571	13.95 Volt	0 Pkt	66 Pcnt
1773042951	13.95 Volt	0 Pkt	66 Pcnt
1773041331	13.95 Volt	0 Pkt	33 Pcnt
1773040612	13.95 Volt	0 Pkt	33 Pcnt
1773039711	13.95 Volt	0 Pkt	28 Pcnt
1773038812	13.95 Volt	0 Pkt	33 Pcnt
1773038091	13.95 Volt	0 Pkt	50 Pcnt
1773037012	13.95 Volt	0 Pkt	33 Pcnt
1773036471	13.95 Volt	0 Pkt	40 Pcnt
1773035212	13.95 Volt	0 Pkt	37 Pcnt
1773034851	14.03 Volt	0 Pkt	37 Pcnt
1773033231	13.95 Volt	0 Pkt	33 Pcnt
1773031612	13.95 Volt	0 Pkt	53 Pcnt
1773031611	13.95 Volt	0 Pkt	53 Pcnt
1773029991	13.95 Volt	10 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

As: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)