TF3GS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TF3GS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	EffT*
1784694309	12.72 Volt	150 Pkt	98 Pcnt	98 Pcnt
1784693109	12.72 Volt	160 Pkt	98 Pcnt	98 Pcnt
1784691909	12.72 Volt	150 Pkt	98 Pcnt	98 Pcnt
1784690709	12.72 Volt	160 Pkt	99 Pcnt	98 Pcnt
1784689509	12.72 Volt	170 Pkt	98 Pcnt	98 Pcnt
1784688309	12.72 Volt	170 Pkt	98 Pcnt	98 Pcnt
1784687109	12.72 Volt	170 Pkt	98 Pcnt	98 Pcnt
1784685909	12.72 Volt	170 Pkt	98 Pcnt	98 Pcnt
1784684709	12.72 Volt	170 Pkt	98 Pcnt	98 Pcnt
1784683509	12.72 Volt	170 Pkt	97 Pcnt	98 Pcnt
1784682309	12.72 Volt	160 Pkt	98 Pcnt	98 Pcnt
1784681109	12.72 Volt	160 Pkt	96 Pcnt	98 Pcnt
1784679909	12.72 Volt	160 Pkt	97 Pcnt	98 Pcnt
1784678709	12.72 Volt	150 Pkt	96 Pcnt	98 Pcnt
1784677509	12.72 Volt	160 Pkt	97 Pcnt	98 Pcnt
1784676310	12.72 Volt	170 Pkt	96 Pcnt	98 Pcnt
1784675110	12.72 Volt	160 Pkt	95 Pcnt	98 Pcnt
1784673910	12.72 Volt	160 Pkt	96 Pcnt	98 Pcnt
1784672710	12.72 Volt	160 Pkt	97 Pcnt	98 Pcnt
1784671510	12.72 Volt	160 Pkt	99 Pcnt	98 Pcnt
1784670310	12.72 Volt	170 Pkt	97 Pcnt	98 Pcnt
1784669110	12.72 Volt	160 Pkt	96 Pcnt	98 Pcnt
1784667910	12.72 Volt	160 Pkt	97 Pcnt	98 Pcnt
1784666710	12.72 Volt	150 Pkt	98 Pcnt	98 Pcnt
1784665510	12.72 Volt	160 Pkt	99 Pcnt	98 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)