W0JRT-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0JRT-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battry*	Charge*	Chg24*	LoadC*	Temp*
1780864399	13.44 V	406 mA	1710 mAh	87.2 mA	88 DegF
1780862595	13.42 V	446 mA	1540 mAh	87.2 mA	84 DegF
1780860806	13.38 V	450 mA	1410 mAh	87 mA	81 DegF
1780857204	12.85 V	80 mA	1440 mAh	88.2 mA	75 DegF
1780855401	12.83 V	48 mA	1590 mAh	87.6 mA	78 DegF
1780853596	12.88 V	138 mA	1790 mAh	86.8 mA	85 DegF
1780851799	12.99 V	132 mA	1890 mAh	86.4 mA	86 DegF
1780849995	13.06 V	260 mA	2050 mAh	86.8 mA	88 DegF
1780846394	13.1 V	178 mA	2110 mAh	85.8 mA	82 DegF
1780844593	12.88 V	176 mA	2130 mAh	85.4 mA	80 DegF
1780842793	12.66 V	26 mA	2160 mAh	85 mA	75 DegF
1780841003	12.67 V	90 mA	2230 mAh	85 mA	76 DegF
1780839200	12.67 V	40 mA	2230 mAh	84.8 mA	75 DegF
1780835603	12.66 V	22 mA	2250 mAh	85 mA	73 DegF
1780831993	12.61 V	0 mA	2260 mAh	85 mA	73 DegF
1780828394	12.62 V	0 mA	2270 mAh	85.4 mA	73 DegF
1780824799	12.62 V	0 mA	2270 mAh	85.4 mA	73 DegF
1780823004	12.64 V	0 mA	2270 mAh	85.2 mA	73 DegF
1780819406	12.66 V	0 mA	2270 mAh	85.6 mA	73 DegF
1780814006	12.69 V	0 mA	2270 mAh	85.6 mA	73 DegF
1780812200	12.7 V	0 mA	2270 mAh	86.2 mA	73 DegF
1780806800	12.74 V	0 mA	2270 mAh	85.8 mA	73 DegF
1780805002	12.75 V	0 mA	2270 mAh	85.8 mA	73 DegF
1780803203	12.77 V	0 mA	2270 mAh	85.8 mA	73 DegF
1780801405	12.77 V	0 mA	2270 mAh	85.6 mA	73 DegF

*Used Equation Coefficients:

Battry: 0, 0.016, 0

Charge: 0, 2, 0

Chg24: 0, 10, 0

LoadC: 0, 0.2, 0

Temp: 0, 1, -100

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)