W1MRC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W1MRC-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1781404435	89 Pkts	77 Pkts	9 Pkts	24 C
1781400835	68 Pkts	60 Pkts	11 Pkts	25 C
1781397236	68 Pkts	60 Pkts	18 Pkts	28 C
1781393636	52 Pkts	45 Pkts	15 Pkts	30 C
1781390036	35 Pkts	31 Pkts	12 Pkts	31 C
1781386435	34 Pkts	30 Pkts	11 Pkts	32 C
1781382835	66 Pkts	61 Pkts	12 Pkts	34 C
1781379235	72 Pkts	67 Pkts	28 Pkts	35 C
1781375635	72 Pkts	68 Pkts	35 Pkts	36 C
1781372035	63 Pkts	59 Pkts	25 Pkts	33 C
1781368435	87 Pkts	81 Pkts	33 Pkts	34 C
1781364835	61 Pkts	54 Pkts	21 Pkts	30 C
1781361235	38 Pkts	32 Pkts	10 Pkts	27 C
1781357635	120 Pkts	112 Pkts	54 Pkts	25 C
1781354035	161 Pkts	149 Pkts	40 Pkts	23 C
1781350435	170 Pkts	164 Pkts	55 Pkts	23 C
1781346835	151 Pkts	144 Pkts	47 Pkts	23 C
1781343235	106 Pkts	101 Pkts	30 Pkts	23 C
1781339635	129 Pkts	120 Pkts	22 Pkts	22 C
1781336035	58 Pkts	54 Pkts	16 Pkts	22 C
1781332435	42 Pkts	38 Pkts	7 Pkts	22 C
1781328835	57 Pkts	51 Pkts	11 Pkts	23 C
1781325235	56 Pkts	51 Pkts	11 Pkts	24 C
1781321635	54 Pkts	48 Pkts	11 Pkts	24 C
1781318035	84 Pkts	77 Pkts	23 Pkts	24 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)