N5GAN-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5GAN-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1757706554	144 Pkts	141 Pkts	77 Pkts	30 C
1757704754	129 Pkts	122 Pkts	61 Pkts	28 C
1757702954	101 Pkts	95 Pkts	44 Pkts	27 C
1757701154	86 Pkts	80 Pkts	41 Pkts	27 C
1757699354	70 Pkts	66 Pkts	30 Pkts	27 C
1757697554	62 Pkts	57 Pkts	21 Pkts	27 C
1757695754	73 Pkts	70 Pkts	37 Pkts	26 C
1757693954	79 Pkts	74 Pkts	34 Pkts	25 C
1757692154	123 Pkts	112 Pkts	50 Pkts	25 C
1757690354	114 Pkts	108 Pkts	47 Pkts	24 C
1757688554	150 Pkts	141 Pkts	45 Pkts	23 C
1757686757	153 Pkts	143 Pkts	45 Pkts	22 C
1757684954	179 Pkts	166 Pkts	48 Pkts	22 C
1757683154	148 Pkts	137 Pkts	45 Pkts	22 C
1757681354	122 Pkts	116 Pkts	43 Pkts	21 C
1757679572	114 Pkts	103 Pkts	32 Pkts	21 C
1757677754	100 Pkts	98 Pkts	29 Pkts	21 C
1757675954	115 Pkts	108 Pkts	30 Pkts	21 C
1757674154	114 Pkts	110 Pkts	25 Pkts	21 C
1757672354	90 Pkts	81 Pkts	26 Pkts	21 C
1757670554	98 Pkts	86 Pkts	28 Pkts	21 C
1757668754	82 Pkts	68 Pkts	27 Pkts	21 C
1757666954	101 Pkts	90 Pkts	38 Pkts	21 C
1757665154	78 Pkts	72 Pkts	27 Pkts	22 C
1757663354	78 Pkts	68 Pkts	31 Pkts	22 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)