VK2TTG-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2TTG-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Battery*	Temp*
1787396228	14.42 Volts	18.29 Deg.C
1787395989	12.69 Volts	12.43 Deg.C
1787393269	11.4 Volts	22.7 Deg.C
1787393149	11.28 Volts	22.21 Deg.C
1787392520	13.98 Volts	25.63 Deg.C
1787392281	14.03 Volts	24.65 Deg.C
1787391922	13.92 Volts	23.67 Deg.C
1787391684	13.92 Volts	23.18 Deg.C
1787391564	13.89 Volts	22.7 Deg.C
1787391444	13.98 Volts	22.7 Deg.C
1787391206	13.89 Volts	21.23 Deg.C
1787391086	13.86 Volts	20.25 Deg.C
1787390727	13.89 Volts	16.83 Deg.C
1787390608	13.65 Volts	13.89 Deg.C
1787367950	13.92 Volts	21.72 Deg.C
1787367830	13.77 Volts	20.25 Deg.C
1787367591	13.92 Volts	17.32 Deg.C
1787367472	13.89 Volts	14.87 Deg.C
1787227232	13.74 Volts	13.89 Deg.C
1787222434	11.4 Volts	22.21 Deg.C
1787222170	11.81 Volts	18.78 Deg.C
1787219663	11.49 Volts	25.63 Deg.C
1787219424	11.49 Volts	25.63 Deg.C
1787217750	11.4 Volts	24.16 Deg.C
1787217033	14.36 Volts	21.23 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)