HP1GDP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1GDP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1780600483	12.23 Volt	220 Pkt	100 Pkt	67 Pcnt	77 Pcnt
1780599883	12.23 Volt	240 Pkt	100 Pkt	67 Pcnt	77 Pcnt
1780599283	12.23 Volt	240 Pkt	100 Pkt	68 Pcnt	77 Pcnt
1780598683	12.23 Volt	260 Pkt	110 Pkt	69 Pcnt	77 Pcnt
1780598083	12.23 Volt	280 Pkt	110 Pkt	68 Pcnt	77 Pcnt
1780597483	12.23 Volt	280 Pkt	110 Pkt	70 Pcnt	77 Pcnt
1780596883	12.23 Volt	300 Pkt	120 Pkt	70 Pcnt	77 Pcnt
1780596283	12.23 Volt	290 Pkt	120 Pkt	72 Pcnt	77 Pcnt
1780595683	12.23 Volt	280 Pkt	120 Pkt	71 Pcnt	77 Pcnt
1780595083	12.23 Volt	260 Pkt	110 Pkt	71 Pcnt	77 Pcnt
1780594483	12.23 Volt	230 Pkt	100 Pkt	72 Pcnt	77 Pcnt
1780593883	12.23 Volt	210 Pkt	100 Pkt	69 Pcnt	77 Pcnt
1780593283	12.23 Volt	190 Pkt	100 Pkt	70 Pcnt	77 Pcnt
1780592683	12.23 Volt	190 Pkt	90 Pkt	72 Pcnt	77 Pcnt
1780592083	12.23 Volt	190 Pkt	90 Pkt	74 Pcnt	77 Pcnt
1780591483	12.23 Volt	180 Pkt	90 Pkt	74 Pcnt	77 Pcnt
1780590883	12.23 Volt	190 Pkt	90 Pkt	75 Pcnt	77 Pcnt
1780590283	12.23 Volt	180 Pkt	90 Pkt	76 Pcnt	77 Pcnt
1780589683	12.23 Volt	180 Pkt	80 Pkt	79 Pcnt	77 Pcnt
1780589083	12.23 Volt	180 Pkt	80 Pkt	80 Pcnt	77 Pcnt
1780588483	12.23 Volt	180 Pkt	80 Pkt	82 Pcnt	77 Pcnt
1780587883	12.23 Volt	190 Pkt	80 Pkt	83 Pcnt	77 Pcnt
1780587283	12.23 Volt	190 Pkt	80 Pkt	85 Pcnt	77 Pcnt
1780586683	12.23 Volt	180 Pkt	80 Pkt	85 Pcnt	77 Pcnt
1780586083	12.23 Volt	180 Pkt	80 Pkt	84 Pcnt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)