K5FTW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K5FTW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772603254	13.73 Volt	580 Pkt	210 Pkt	62 Pcnt
1772602662	13.73 Volt	580 Pkt	210 Pkt	62 Pcnt
1772602054	13.73 Volt	580 Pkt	210 Pkt	61 Pcnt
1772601454	13.73 Volt	590 Pkt	220 Pkt	63 Pcnt
1772600854	13.73 Volt	610 Pkt	220 Pkt	64 Pcnt
1772600255	13.05 Volt	610 Pkt	220 Pkt	64 Pcnt
1772599654	13.73 Volt	610 Pkt	230 Pkt	65 Pcnt
1772599061	13.73 Volt	610 Pkt	230 Pkt	65 Pcnt
1772598454	13.73 Volt	600 Pkt	220 Pkt	65 Pcnt
1772597856	13.43 Volt	600 Pkt	220 Pkt	65 Pcnt
1772597260	13.73 Volt	620 Pkt	220 Pkt	66 Pcnt
1772596656	13.73 Volt	630 Pkt	220 Pkt	68 Pcnt
1772596056	13.73 Volt	660 Pkt	210 Pkt	70 Pcnt
1772595463	13.73 Volt	730 Pkt	210 Pkt	72 Pcnt
1772594854	13.73 Volt	810 Pkt	240 Pkt	75 Pcnt
1772594256	13.73 Volt	840 Pkt	250 Pkt	74 Pcnt
1772593660	13.73 Volt	860 Pkt	250 Pkt	74 Pcnt
1772593054	13.73 Volt	890 Pkt	270 Pkt	73 Pcnt
1772592473	13.73 Volt	870 Pkt	280 Pkt	73 Pcnt
1772591860	13.73 Volt	830 Pkt	270 Pkt	72 Pcnt
1772591261	13.73 Volt	780 Pkt	260 Pkt	70 Pcnt
1772590655	13.43 Volt	750 Pkt	250 Pkt	70 Pcnt
1772590057	13.73 Volt	740 Pkt	260 Pkt	68 Pcnt
1772589461	13.73 Volt	740 Pkt	260 Pkt	67 Pcnt
1772588855	13.73 Volt	750 Pkt	260 Pkt	67 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)