WA6RSV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA6RSV-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1789945937	401 Pkts	396 Pkts	25 Pkts	17 C
1789942337	391 Pkts	379 Pkts	35 Pkts	17 C
1789938737	339 Pkts	330 Pkts	25 Pkts	17 C
1789935137	373 Pkts	364 Pkts	23 Pkts	18 C
1789931537	335 Pkts	327 Pkts	24 Pkts	20 C
1789927937	301 Pkts	296 Pkts	15 Pkts	19 C
1789924337	300 Pkts	295 Pkts	12 Pkts	19 C
1789920737	239 Pkts	233 Pkts	18 Pkts	19 C
1789917137	209 Pkts	205 Pkts	20 Pkts	19 C
1789913537	271 Pkts	265 Pkts	7 Pkts	19 C
1789909937	236 Pkts	227 Pkts	3 Pkts	19 C
1789906337	239 Pkts	228 Pkts	4 Pkts	19 C
1789902737	229 Pkts	221 Pkts	3 Pkts	20 C
1789899137	238 Pkts	228 Pkts	3 Pkts	20 C
1789895537	245 Pkts	234 Pkts	4 Pkts	20 C
1789891937	251 Pkts	242 Pkts	3 Pkts	20 C
1789888337	250 Pkts	240 Pkts	5 Pkts	19 C
1789884737	235 Pkts	229 Pkts	4 Pkts	19 C
1789881137	258 Pkts	252 Pkts	4 Pkts	19 C
1789877537	300 Pkts	291 Pkts	3 Pkts	19 C
1789873937	400 Pkts	394 Pkts	3 Pkts	19 C
1789870337	403 Pkts	398 Pkts	14 Pkts	19 C
1789866737	392 Pkts	384 Pkts	11 Pkts	19 C
1789863137	344 Pkts	336 Pkts	16 Pkts	19 C
1789859537	320 Pkts	311 Pkts	20 Pkts	19 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)