EB5KT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EB5KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*
1789962360	10 Count	835 Count
1789960557	9 Count	743 Count
1789958754	8 Count	668 Count
1789956950	7 Count	582 Count
1789955190	6 Count	509 Count
1789953382	5 Count	441 Count
1789951579	4 Count	364 Count
1789949776	3 Count	295 Count
1789947972	2 Count	224 Count
1789946169	1 Count	155 Count
1789944366	0 Count	77 Count
1789942562	11 Count	1064 Count
1789940759	10 Count	988 Count
1789938956	9 Count	908 Count
1789937153	8 Count	828 Count
1789935350	7 Count	734 Count
1789933584	6 Count	644 Count
1789931781	5 Count	563 Count
1789929978	4 Count	465 Count
1789928175	3 Count	380 Count
1789926372	2 Count	294 Count
1789924569	1 Count	202 Count
1789922765	0 Count	97 Count
1789920961	10 Count	1041 Count
1789919158	9 Count	938 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)