IU5SES-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU5SES-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761574480	1008.5 hPa	19.5 C deg	41.7 %	1014.5 hPa	0 C deg
1761574480	1008.5 hPa	19.5 C deg	41.7 %	1014.5 hPa	0 C deg
1761570880	1008.9 hPa	19.2 C deg	41.8 %	1014.9 hPa	0 C deg
1761570880	1008.9 hPa	19.2 C deg	41.8 %	1014.9 hPa	0 C deg
1761569080	1009.3 hPa	19.5 C deg	41.2 %	1015.3 hPa	0 C deg
1761569080	1009.3 hPa	19.5 C deg	41.2 %	1015.3 hPa	0 C deg
1761567280	1009 hPa	19.4 C deg	41.5 %	1015 hPa	0 C deg
1761567280	1009 hPa	19.4 C deg	41.5 %	1015 hPa	0 C deg
1761565480	1009.5 hPa	19.5 C deg	41.4 %	1015.5 hPa	0 C deg
1761565480	1009.5 hPa	19.5 C deg	41.4 %	1015.5 hPa	0 C deg
1761563680	1009.7 hPa	19.5 C deg	42.1 %	1015.7 hPa	0 C deg
1761563680	1009.7 hPa	19.5 C deg	42.1 %	1015.7 hPa	0 C deg
1761561880	1010.2 hPa	19.6 C deg	42.4 %	1016.3 hPa	0 C deg
1761561880	1010.2 hPa	19.6 C deg	42.4 %	1016.3 hPa	0 C deg
1761560079	1010.4 hPa	19.5 C deg	43.3 %	1016.4 hPa	0 C deg
1761560079	1010.4 hPa	19.5 C deg	43.3 %	1016.4 hPa	0 C deg
1761558279	1010.4 hPa	19.5 C deg	43.1 %	1016.4 hPa	0 C deg
1761558279	1010.4 hPa	19.5 C deg	43.1 %	1016.4 hPa	0 C deg
1761556479	1010.3 hPa	19.5 C deg	42.5 %	1016.3 hPa	0 C deg
1761556479	1010.3 hPa	19.5 C deg	42.5 %	1016.3 hPa	0 C deg
1761554679	1010 hPa	19.4 C deg	42.5 %	1016 hPa	0 C deg
1761554679	1010 hPa	19.4 C deg	42.5 %	1016 hPa	0 C deg
1761552879	1010 hPa	19.2 C deg	41.1 %	1016 hPa	0 C deg
1761552879	1010 hPa	19.2 C deg	41.1 %	1016 hPa	0 C deg
1761551079	1009.9 hPa	19.2 C deg	36.4 %	1015.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)