DK4PE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK4PE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1753649816	960.3 hPa	26.8 C deg	45.5 %	1012.3 hPa	0 C deg
1753648015	960.5 hPa	26.8 C deg	45.5 %	1012.6 hPa	0 C deg
1753646215	960.7 hPa	26.9 C deg	45.4 %	1012.8 hPa	0 C deg
1753644415	960.7 hPa	26.9 C deg	45.5 %	1012.7 hPa	0 C deg
1753642614	960.7 hPa	26.9 C deg	45.5 %	1012.8 hPa	0 C deg
1753640814	960.9 hPa	26.9 C deg	45.5 %	1012.9 hPa	0 C deg
1753639014	961 hPa	27 C deg	45.4 %	1013 hPa	0 C deg
1753637213	960.9 hPa	27 C deg	45.5 %	1012.9 hPa	0 C deg
1753635413	960.9 hPa	27.1 C deg	45.5 %	1012.9 hPa	0 C deg
1753633613	961.4 hPa	27.2 C deg	45.4 %	1013.5 hPa	0 C deg
1753631812	959.9 hPa	27.7 C deg	45 %	1011.8 hPa	0 C deg
1753630012	960 hPa	30.5 C deg	41.4 %	1011.3 hPa	0 C deg
1753628212	960.1 hPa	27.1 C deg	45.7 %	1012.1 hPa	0 C deg
1753626411	960.6 hPa	27.4 C deg	44.5 %	1012.6 hPa	0 C deg
1753624611	960.2 hPa	30 C deg	41.1 %	1011.7 hPa	0 C deg
1753621010	960.7 hPa	28.9 C deg	44.4 %	1012.4 hPa	0 C deg
1753619210	960.8 hPa	28.8 C deg	45.1 %	1012.6 hPa	0 C deg
1753617410	961.2 hPa	28.1 C deg	46.4 %	1013.1 hPa	0 C deg
1753615609	961.1 hPa	28.5 C deg	46.2 %	1012.9 hPa	0 C deg
1753613809	961.4 hPa	28.6 C deg	46.8 %	1013.2 hPa	0 C deg
1753612009	961.6 hPa	28.2 C deg	48.7 %	1013.5 hPa	0 C deg
1753606608	962.3 hPa	26 C deg	55 %	1014.6 hPa	0 C deg
1753606526	962.3 hPa	25.7 C deg	54.5 %	1014.7 hPa	0 C deg
1753606005	962.3 hPa	25.1 C deg	56.8 %	1014.8 hPa	0 C deg
1753605407	962.4 hPa	23.4 C deg	62.9 %	1015.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)