This is the latest recevied telemetry packets stored in our database for station/object KJ4SNT-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Vin*
Rx1h*
Dg1h*
Eff1h*
Rx10m*
1773015886
14.22 Volt
210 Pkt
50 Pkt
63 Pcnt
41 Pkt
1773011085
14.22 Volt
140 Pkt
40 Pkt
49 Pcnt
27 Pkt
1772615116
14.22 Volt
90 Pkt
30 Pkt
38 Pcnt
14 Pkt
1772563520
14.22 Volt
200 Pkt
50 Pkt
56 Pcnt
18 Pkt
1772486733
14.22 Volt
10 Pkt
0 Pkt
14 Pcnt
0 Pkt
1772478328
14.22 Volt
10 Pkt
0 Pkt
20 Pcnt
1 Pkt
1772427932
14.22 Volt
10 Pkt
0 Pkt
53 Pcnt
1 Pkt
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Rx10m: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)