FW0727 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object FW0727. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Ground*	Inside*	PV_U*	Bat*
1789942792	20.5 degC	20.5 degC	0.08 V	4.11 V
1789942447	21 degC	20.5 degC	0.08 V	4.11 V
1789941775	21 degC	21 degC	0.05 V	4.11 V
1789941420	21 degC	21 degC	0.05 V	4.11 V
1789940747	21 degC	21 degC	0.05 V	4.11 V
1789940403	21 degC	21 degC	0.05 V	4.11 V
1789939729	21 degC	21 degC	0.05 V	4.11 V
1789939383	21 degC	21.5 degC	0.05 V	4.11 V
1789939039	21 degC	21.5 degC	0.05 V	4.11 V
1789938694	21 degC	21.5 degC	0.05 V	4.11 V
1789938011	21 degC	21.5 degC	0.05 V	4.11 V
1789937666	21 degC	21.5 degC	0.05 V	4.12 V
1789937322	21 degC	22 degC	0.05 V	4.11 V
1789936649	21 degC	22 degC	0.05 V	4.12 V
1789935968	21 degC	22 degC	0.05 V	4.11 V
1789935616	21 degC	22 degC	0.05 V	4.12 V
1789934614	21 degC	22.5 degC	0.05 V	4.12 V
1789933940	21 degC	22.5 degC	0.05 V	4.12 V
1789933596	21 degC	22.5 degC	0.05 V	4.12 V
1789933252	21 degC	22.5 degC	0.05 V	4.12 V
1789932899	21 degC	22.5 degC	0.05 V	4.12 V
1789932554	21 degC	23 degC	0.05 V	4.12 V
1789932209	21 degC	23 degC	0.05 V	4.12 V
1789930550	21.5 degC	23 degC	0.05 V	4.12 V
1789929876	21.5 degC	23 degC	0.05 V	4.12 V

*Used Equation Coefficients:

Ground: 0, 0.5, -25

Inside: 0, 0.5, -25

PV_P: 0, 0.01, 0

PV_U: 0, 0.025, 0

Bat: 0, 0.01, 2.5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)