IW3BHG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW3BHG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1777578502	13.87 Volt	58 Pkt	0 Pkt	97 Pcnt
1777576702	13.87 Volt	63 Pkt	0 Pkt	98 Pcnt
1777574902	13.87 Volt	67 Pkt	0 Pkt	97 Pcnt
1777573102	13.87 Volt	66 Pkt	0 Pkt	96 Pcnt
1777571302	13.8 Volt	63 Pkt	0 Pkt	96 Pcnt
1777569502	13.87 Volt	60 Pkt	0 Pkt	95 Pcnt
1777567702	13.87 Volt	72 Pkt	2 Pkt	95 Pcnt
1777565902	13.87 Volt	79 Pkt	2 Pkt	95 Pcnt
1777564102	13.8 Volt	75 Pkt	0 Pkt	97 Pcnt
1777562302	13.87 Volt	74 Pkt	0 Pkt	97 Pcnt
1777557910	13.87 Volt	70 Pkt	0 Pkt	96 Pcnt
1777552435	13.72 Volt	76 Pkt	0 Pkt	95 Pcnt
1777550635	13.87 Volt	73 Pkt	0 Pkt	96 Pcnt
1777548835	13.87 Volt	71 Pkt	0 Pkt	95 Pcnt
1777547035	13.87 Volt	78 Pkt	0 Pkt	96 Pcnt
1777545235	13.72 Volt	78 Pkt	0 Pkt	97 Pcnt
1777543435	13.87 Volt	68 Pkt	0 Pkt	95 Pcnt
1777541635	13.8 Volt	66 Pkt	0 Pkt	94 Pcnt
1777539835	13.87 Volt	66 Pkt	0 Pkt	95 Pcnt
1777538035	13.8 Volt	61 Pkt	0 Pkt	96 Pcnt
1777536235	13.72 Volt	56 Pkt	0 Pkt	96 Pcnt
1777534435	13.72 Volt	57 Pkt	0 Pkt	97 Pcnt
1777532642	13.72 Volt	55 Pkt	0 Pkt	96 Pcnt
1777530835	13.87 Volt	54 Pkt	0 Pkt	95 Pcnt
1777529035	13.87 Volt	53 Pkt	0 Pkt	95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.073, 0

Rx1h: 0, 1, 0

Dg1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)