K4QY-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K4QY-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1773114260	232 Pkts	221 Pkts	43 Pkts	29 C
1773110660	253 Pkts	245 Pkts	43 Pkts	29 C
1773107060	205 Pkts	198 Pkts	45 Pkts	29 C
1773103460	225 Pkts	215 Pkts	48 Pkts	29 C
1773099860	254 Pkts	240 Pkts	90 Pkts	29 C
1773096260	186 Pkts	169 Pkts	62 Pkts	29 C
1773092660	188 Pkts	176 Pkts	83 Pkts	29 C
1773089060	202 Pkts	190 Pkts	92 Pkts	28 C
1773085460	174 Pkts	163 Pkts	59 Pkts	29 C
1773081860	199 Pkts	189 Pkts	70 Pkts	28 C
1773078260	163 Pkts	153 Pkts	56 Pkts	29 C
1773074660	198 Pkts	187 Pkts	68 Pkts	29 C
1773071060	250 Pkts	239 Pkts	89 Pkts	28 C
1773067460	258 Pkts	251 Pkts	91 Pkts	29 C
1773063860	261 Pkts	251 Pkts	90 Pkts	29 C
1773060261	278 Pkts	265 Pkts	88 Pkts	29 C
1773055661	297 Pkts	290 Pkts	67 Pkts	29 C
1773052061	247 Pkts	234 Pkts	80 Pkts	29 C
1773048460	267 Pkts	253 Pkts	87 Pkts	29 C
1773044861	274 Pkts	262 Pkts	75 Pkts	29 C
1773041260	251 Pkts	236 Pkts	81 Pkts	29 C
1773037661	230 Pkts	216 Pkts	80 Pkts	29 C
1773034060	236 Pkts	226 Pkts	86 Pkts	29 C
1773030460	306 Pkts	294 Pkts	94 Pkts	29 C
1773026860	291 Pkts	280 Pkts	94 Pkts	29 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)