OE5WWO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE5WWO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Eff1h*	Total*
1776681877	2 Pkt	10 Pcnt	10 Pcnt
1776680976	1 Pkt	9 Pcnt	10 Pcnt
1776680075	1 Pkt	7 Pcnt	10 Pcnt
1776679174	1 Pkt	10 Pcnt	10 Pcnt
1776678273	1 Pkt	12 Pcnt	10 Pcnt
1776677372	0 Pkt	11 Pcnt	10 Pcnt
1776676472	2 Pkt	14 Pcnt	10 Pcnt
1776675571	1 Pkt	10 Pcnt	10 Pcnt
1776674670	1 Pkt	10 Pcnt	10 Pcnt
1776673769	0 Pkt	9 Pcnt	10 Pcnt
1776672868	1 Pkt	7 Pcnt	10 Pcnt
1776671967	1 Pkt	8 Pcnt	10 Pcnt
1776671066	1 Pkt	8 Pcnt	10 Pcnt
1776670165	0 Pkt	8 Pcnt	10 Pcnt
1776669265	2 Pkt	13 Pcnt	10 Pcnt
1776668364	1 Pkt	11 Pcnt	10 Pcnt
1776667463	1 Pkt	11 Pcnt	10 Pcnt
1776666562	0 Pkt	8 Pcnt	10 Pcnt
1776665661	1 Pkt	7 Pcnt	10 Pcnt
1776664763	1 Pkt	8 Pcnt	10 Pcnt
1776663859	1 Pkt	7 Pcnt	10 Pcnt
1776662958	0 Pkt	8 Pcnt	10 Pcnt
1776662058	1 Pkt	10 Pcnt	10 Pcnt
1776661157	1 Pkt	10 Pcnt	10 Pcnt
1776660256	1 Pkt	12 Pcnt	10 Pcnt

*Used Equation Coefficients:

RX1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff1h: 0, 1, 0

Total: 0, 1, 0

Vin: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)