WC4PEM-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1777101400	24.5 C	14.18 Volt	150 Pkt	520 Pkt	53 Pcnt
1777101101	25.5 C	14.18 Volt	150 Pkt	540 Pkt	54 Pcnt
1777101100	25.5 C	14.18 Volt	150 Pkt	540 Pkt	54 Pcnt
1777100800	28 C	14.18 Volt	150 Pkt	550 Pkt	54 Pcnt
1777100501	24.5 C	14.18 Volt	150 Pkt	560 Pkt	54 Pcnt
1777100500	24.5 C	14.18 Volt	150 Pkt	560 Pkt	54 Pcnt
1777100200	25.5 C	14.18 Volt	160 Pkt	570 Pkt	55 Pcnt
1777099901	28 C	14.18 Volt	160 Pkt	600 Pkt	56 Pcnt
1777099900	28 C	14.18 Volt	160 Pkt	600 Pkt	56 Pcnt
1777099600	26 C	14.18 Volt	160 Pkt	610 Pkt	55 Pcnt
1777099301	25 C	14.18 Volt	160 Pkt	630 Pkt	56 Pcnt
1777099300	25 C	14.18 Volt	160 Pkt	630 Pkt	56 Pcnt
1777099000	27 C	14.18 Volt	170 Pkt	650 Pkt	58 Pcnt
1777098701	26.5 C	14.18 Volt	170 Pkt	660 Pkt	59 Pcnt
1777098700	26.5 C	14.18 Volt	170 Pkt	660 Pkt	59 Pcnt
1777098400	24.5 C	14.18 Volt	170 Pkt	670 Pkt	59 Pcnt
1777098101	27 C	14.18 Volt	170 Pkt	670 Pkt	58 Pcnt
1777098101	27 C	14.18 Volt	170 Pkt	670 Pkt	58 Pcnt
1777097801	26.5 C	14.18 Volt	170 Pkt	670 Pkt	59 Pcnt
1777097501	24.5 C	14.18 Volt	170 Pkt	660 Pkt	58 Pcnt
1777097501	24.5 C	14.18 Volt	170 Pkt	660 Pkt	58 Pcnt
1777097201	26.5 C	14.18 Volt	180 Pkt	680 Pkt	59 Pcnt
1777096901	27 C	14.18 Volt	180 Pkt	670 Pkt	59 Pcnt
1777096901	27 C	14.18 Volt	180 Pkt	670 Pkt	59 Pcnt
1777096601	24.5 C	14.18 Volt	180 Pkt	690 Pkt	60 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)