KJ4UBX-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KJ4UBX-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vcell*	RSSI*	Light*	Awake*
1761523351	3.66 Vdc	-58 dBm	1 lux	2.8 secs
1761522769	3.66 Vdc	-58 dBm	1 lux	3.9 secs
1761522189	3.66 Vdc	-58 dBm	1 lux	3.4 secs
1761521608	3.66 Vdc	-58 dBm	1 lux	3.8 secs
1761521028	3.66 Vdc	-57 dBm	1 lux	3.2 secs
1761520446	3.66 Vdc	-57 dBm	1 lux	3.6 secs
1761519867	3.66 Vdc	-60 dBm	1 lux	3.2 secs
1761519286	3.66 Vdc	-60 dBm	1 lux	3.2 secs
1761518705	3.66 Vdc	-59 dBm	1 lux	3.7 secs
1761518125	3.66 Vdc	-59 dBm	4 lux	3.8 secs
1761517545	3.67 Vdc	-61 dBm	1 lux	3.2 secs
1761516964	3.67 Vdc	-61 dBm	1 lux	3.1 secs
1761516383	3.67 Vdc	-63 dBm	4 lux	3.2 secs
1761515804	3.67 Vdc	-64 dBm	16 lux	3 secs
1761515224	3.67 Vdc	-67 dBm	64 lux	3.9 secs
1761514646	3.67 Vdc	-66 dBm	169 lux	3.3 secs
1761513485	3.67 Vdc	-67 dBm	484 lux	3.2 secs
1761512904	3.67 Vdc	-67 dBm	676 lux	3.4 secs
1761512324	3.67 Vdc	-68 dBm	625 lux	3.2 secs
1761511743	3.67 Vdc	-67 dBm	729 lux	5.2 secs
1761511164	3.67 Vdc	-67 dBm	484 lux	3.7 secs
1761510582	3.67 Vdc	-68 dBm	676 lux	3.2 secs
1761510002	3.67 Vdc	-67 dBm	961 lux	3.9 secs
1761509423	3.67 Vdc	-67 dBm	1089 lux	3.2 secs
1761508842	3.67 Vdc	-67 dBm	1681 lux	3.9 secs

*Used Equation Coefficients:

Vcell: 0, 0.01, 2.5

RSSI: 0, -1, 0

Light: 1, 0, 0

Awake: 0, 0.1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)