WA0TQG-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA0TQG-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	HS temp*	2Mtemp*	RFtem*
1782059061	36 DegC	36 DegC	46 DegC
1782058581	35 DegC	39 DegC	43 DegC
1782058554	33 DegC	39 DegC	43 DegC
1782058534	35 DegC	39 DegC	43 DegC
1781992921	37 DegC	38 DegC	44 DegC
1781992915	37 DegC	38 DegC	44 DegC
1781992831	36 DegC	37 DegC	41 DegC
1781992805	33 DegC	37 DegC	41 DegC
1781991255	40 DegC	36 DegC	47 DegC
1781991249	40 DegC	36 DegC	47 DegC
1781990683	40 DegC	37 DegC	46 DegC
1781990676	39 DegC	37 DegC	46 DegC
1781990552	41 DegC	37 DegC	47 DegC
1781990546	39 DegC	37 DegC	47 DegC
1781989968	35 DegC	40 DegC	44 DegC
1781989941	35 DegC	40 DegC	44 DegC
1781821419	42 DegC	37 DegC	47 DegC
1781821413	41 DegC	37 DegC	47 DegC
1781820924	40 DegC	37 DegC	47 DegC
1781820322	43 DegC	37 DegC	47 DegC
1781819720	40 DegC	36 DegC	47 DegC
1781819117	41 DegC	36 DegC	47 DegC
1781818515	41 DegC	36 DegC	47 DegC
1781817913	41 DegC	36 DegC	47 DegC
1781817311	40 DegC	36 DegC	45 DegC

*Used Equation Coefficients:

HS temp: 0, 1, 0

2Mtemp: 0, 1, 0

RFtem: 0, 1, 0

Error: 0, 1, 0

Warn: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)