WA0TQG-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA0TQG-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	HS temp*	Currnt*	Volts*	Ctl V*
1782059062	34 DegC	0.1 Amps	12.6 Volts	0.1 Volts
1782058582	35 DegC	0.1 Amps	12.7 Volts	0 Volts
1782058555	36 DegC	0.1 Amps	12.6 Volts	0.1 Volts
1782058535	33 DegC	0.1 Amps	12.7 Volts	0.1 Volts
1781992922	35 DegC	0.1 Amps	12.6 Volts	0.1 Volts
1781992916	34 DegC	0.1 Amps	12.6 Volts	0 Volts
1781992832	34 DegC	0.1 Amps	12.7 Volts	0 Volts
1781992805	35 DegC	0.1 Amps	12.6 Volts	0.1 Volts
1781991256	36 DegC	0.1 Amps	12.7 Volts	0.1 Volts
1781991250	36 DegC	0.1 Amps	12.6 Volts	0.1 Volts
1781990683	44 DegC	0.1 Amps	12.7 Volts	0 Volts
1781990677	43 DegC	6 Amps	11.7 Volts	4.5 Volts
1781990553	36 DegC	6.2 Amps	11.9 Volts	4.5 Volts
1781990546	35 DegC	0.1 Amps	12.7 Volts	0 Volts
1781989968	34 DegC	0.1 Amps	12.6 Volts	0 Volts
1781989941	34 DegC	0.1 Amps	12.6 Volts	0.1 Volts
1781821420	38 DegC	0.1 Amps	12.6 Volts	0.1 Volts
1781821413	36 DegC	0.1 Amps	12.6 Volts	0 Volts
1781820924	37 DegC	0.1 Amps	12.7 Volts	0 Volts
1781820322	38 DegC	0.1 Amps	12.7 Volts	0 Volts
1781819720	34 DegC	0.1 Amps	12.6 Volts	0 Volts
1781819118	37 DegC	0.1 Amps	12.6 Volts	0 Volts
1781818516	35 DegC	0.1 Amps	12.7 Volts	0.1 Volts
1781817914	35 DegC	0.1 Amps	12.6 Volts	0 Volts
1781817312	41 DegC	0.1 Amps	12.6 Volts	0 Volts

*Used Equation Coefficients:

HS temp: 0, 1, 0

Currnt: 0, 0.1, 0

Volts: 0, 0.1, 0

Ctl V: 0, 0.1, 0

Value5: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)