DB0TA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0TA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765736240	0.11 Rx Erlang	0.04 Tx Erlang	96 count/10m	0 count/10m	29 count/10m
1765735040	0.14 Rx Erlang	0.04 Tx Erlang	110 count/10m	0 count/10m	36 count/10m
1765732640	0.14 Rx Erlang	0.05 Tx Erlang	113 count/10m	5 count/10m	35 count/10m
1765730240	0.14 Rx Erlang	0.05 Tx Erlang	126 count/10m	2 count/10m	40 count/10m
1765729040	0.13 Rx Erlang	0.04 Tx Erlang	120 count/10m	4 count/10m	35 count/10m
1765727840	0.13 Rx Erlang	0.05 Tx Erlang	118 count/10m	0 count/10m	35 count/10m
1765726644	0.14 Rx Erlang	0.04 Tx Erlang	128 count/10m	0 count/10m	33 count/10m
1765725440	0.14 Rx Erlang	0.05 Tx Erlang	125 count/10m	0 count/10m	40 count/10m
1765724240	0.13 Rx Erlang	0.05 Tx Erlang	126 count/10m	2 count/10m	39 count/10m
1765723040	0.15 Rx Erlang	0.05 Tx Erlang	139 count/10m	2 count/10m	42 count/10m
1765721840	0.14 Rx Erlang	0.05 Tx Erlang	129 count/10m	2 count/10m	38 count/10m
1765720640	0.15 Rx Erlang	0.04 Tx Erlang	133 count/10m	0 count/10m	37 count/10m
1765719440	0.14 Rx Erlang	0.05 Tx Erlang	124 count/10m	1 count/10m	40 count/10m
1765717040	0.15 Rx Erlang	0.05 Tx Erlang	133 count/10m	3 count/10m	39 count/10m
1765714640	0.14 Rx Erlang	0.04 Tx Erlang	114 count/10m	1 count/10m	39 count/10m
1765713440	0.14 Rx Erlang	0.04 Tx Erlang	125 count/10m	3 count/10m	36 count/10m
1765712240	0.15 Rx Erlang	0.04 Tx Erlang	127 count/10m	3 count/10m	39 count/10m
1765711040	0.14 Rx Erlang	0.05 Tx Erlang	115 count/10m	1 count/10m	41 count/10m
1765709840	0.14 Rx Erlang	0.05 Tx Erlang	124 count/10m	0 count/10m	46 count/10m
1765708640	0.14 Rx Erlang	0.05 Tx Erlang	123 count/10m	0 count/10m	41 count/10m
1765707440	0.13 Rx Erlang	0.05 Tx Erlang	122 count/10m	1 count/10m	38 count/10m
1765706240	0.12 Rx Erlang	0.04 Tx Erlang	111 count/10m	1 count/10m	35 count/10m
1765705040	0.12 Rx Erlang	0.04 Tx Erlang	106 count/10m	4 count/10m	36 count/10m
1765703840	0.12 Rx Erlang	0.04 Tx Erlang	108 count/10m	1 count/10m	35 count/10m
1765702653	0.13 Rx Erlang	0.05 Tx Erlang	108 count/10m	0 count/10m	38 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)