CQ0XTS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CQ0XTS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*
1781403353	158	225	255
1781403171	158	225	255
1781402990	158	225	255
1781402808	158	225	255
1781402626	158	225	255
1781402444	158	225	255
1781402263	158	225	255
1781402081	158	225	255
1781401900	158	225	255
1781401718	158	225	255
1781401536	158	225	255
1781401355	158	225	255
1781401173	158	225	255
1781400991	158	225	255
1781400810	158	225	255
1781400628	158	225	255
1781400447	158	225	255
1781400265	158	225	255
1781400083	158	225	255
1781399901	158	225	255
1781399720	158	225	255
1781399538	158	225	255
1781399357	158	225	255
1781399175	158	225	255
1781398993	158	225	255

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)