F4HVV-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4HVV-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	VBat*	IBat*	VSol*	ISol*	TBox*
1753632078	13.64 V	33 mA	21.95 V	67 mA	25.1 °C
1753602813	12.69 V	38 mA	11.97 V	2 mA	11.7 °C
1753602809	12.69 V	38 mA	12.16 V	1 mA	11.7 °C
1753602805	12.69 V	38 mA	10.96 V	2 mA	11.7 °C
1753597754	12.7 V	34 mA	4.4 V	1 mA	11.7 °C
1753579414	12.89 V	39 mA	0.05 V	3 mA	13.8 °C
1753579410	12.9 V	37 mA	0.05 V	2 mA	14.03 °C
1753579407	12.91 V	33 mA	0.06 V	2 mA	14.53 °C
1753547743	13.66 V	37 mA	18.07 V	50 mA	24.05 °C
1753546843	13.61 V	36 mA	21.24 V	48 mA	27.65 °C
1753545942	13.63 V	33 mA	21.27 V	47 mA	25.05 °C
1753532434	13.62 V	36 mA	16.59 V	89 mA	24.43 °C
1753531533	13.6 V	25 mA	19.72 V	78 mA	27.95 °C
1753518925	13.32 V	36 mA	15.94 V	117 mA	16.88 °C
1753518408	13.17 V	38 mA	14.44 V	70 mA	16.58 °C
1753517124	13.32 V	28 mA	15.47 V	83 mA	18.4 °C
1753502873	12.83 V	38 mA	0.04 V	1 mA	12.58 °C
1753502870	12.83 V	38 mA	0.04 V	1 mA	12.85 °C
1753502866	12.84 V	35 mA	0.04 V	2 mA	13.03 °C
1753474807	12.91 V	38 mA	0.05 V	2 mA	14.85 °C
1753473907	12.89 V	90 mA	0.12 V	3 mA	14.95 °C
1753464074	13.58 V	37 mA	19.61 V	52 mA	27.8 °C
1753453198	13.59 V	35 mA	21.1 V	50 mA	27.65 °C
1753452298	13.61 V	33 mA	22.07 V	48 mA	26.35 °C
1753429505	12.84 V	33 mA	0.04 V	2 mA	12.1 °C

*Used Equation Coefficients:

VBat: 0, 0.001, 0

IBat: 0, 1, 0

VSol: 0, 0.001, 0

ISol: 0, 1, 0

TBox: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)