EL-DL8HW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-DL8HW. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1753789071	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1753787871	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1753787271	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1753786671	0 RX Erlang	12 TX Erlang	0 RXcount/10m	7 TXcount/10m
1753786071	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1753785471	0 RX Erlang	22 TX Erlang	0 RXcount/10m	12 TXcount/10m
1753783671	0 RX Erlang	29 TX Erlang	0 RXcount/10m	15 TXcount/10m
1753783071	0 RX Erlang	37 TX Erlang	0 RXcount/10m	14 TXcount/10m
1753782471	0 RX Erlang	14 TX Erlang	0 RXcount/10m	6 TXcount/10m
1753781871	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1753781271	0 RX Erlang	14 TX Erlang	0 RXcount/10m	8 TXcount/10m
1753780671	0 RX Erlang	259 TX Erlang	0 RXcount/10m	7 TXcount/10m
1753780071	0 RX Erlang	143 TX Erlang	0 RXcount/10m	20 TXcount/10m
1753779471	0 RX Erlang	5 TX Erlang	0 RXcount/10m	3 TXcount/10m
1753778871	0 RX Erlang	52 TX Erlang	0 RXcount/10m	13 TXcount/10m
1753778271	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1753777671	0 RX Erlang	7 TX Erlang	0 RXcount/10m	4 TXcount/10m
1753777072	0 RX Erlang	9 TX Erlang	0 RXcount/10m	4 TXcount/10m
1753776471	0 RX Erlang	373 TX Erlang	0 RXcount/10m	22 TXcount/10m
1753775871	0 RX Erlang	17 TX Erlang	0 RXcount/10m	7 TXcount/10m
1753775271	0 RX Erlang	15 TX Erlang	0 RXcount/10m	4 TXcount/10m
1753774671	0 RX Erlang	8 TX Erlang	0 RXcount/10m	5 TXcount/10m
1753774071	0 RX Erlang	9 TX Erlang	0 RXcount/10m	4 TXcount/10m
1753773471	0 RX Erlang	83 TX Erlang	0 RXcount/10m	12 TXcount/10m
1753772871	0 RX Erlang	892 TX Erlang	0 RXcount/10m	18 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)